Mfusi, Busisiwe JMathe, Ntombizodwa RBisset, HModiba, RosinahPopoola, PAI2026-02-212026-02-212026-021996-1944https://doi.org/10.3390/ma19040715http://hdl.handle.net/10204/14704Titanium carbide has developed into an exceptional reinforcement contender in Aluminium Matrix Composites (AMCs) because of its greater characteristics such as elevated hardness, elevated elastic modulus, low heat conductivity, and constancy at moderately elevated temperatures. Furthermore, it is consequently selected as the reinforcing segment in AMCs because of its good thermodynamic and wettability stability inside the aluminium melt pool. In this work, titanium carbide powder was mixed to distinguish AlSi10Mg strengthen ing by the additive manufacturing (AM) process in the category of powder bed identified as Powder Bed Fusion (PBF). The objective of the study was to have homogeneously mixed powders for processing on the reinforcement of AlSi10Mg with TiC. Different characterisa tion procedures were carried out, such as scanning electron microscope energy dispersive X-ray spectroscopy (SEM-EDS), pycnometry, and thermogravimetric analysis (TGA). Theadvancement of powder density from 2.65 to 2.72 g/cm3 and surface area from 0.02 to 0.14 m2/g was accomplished. The modelling findings concurred that the addition of Ti and C increases the density of the alloy, with Ti contributing more to AlSi than C. It was deduced that with Ti and C added to the system, the bulk modulus increases, with Al6Si8TiC having the largest value of 80.34 GPa.FulltextenTitanium carbideAlSi10MgFirst principleMetal matrix compositeAdditive manufacturingArticleN/A