Seismic moment tensor resolution on a local scale: Simulated rockburst and mine-induced seismic events in the Kopanang gold mine, South Africa

Abstract

Seismic records contain information about the effect of the source as well as the effect of wave propagation through the rock mass. The effect of wave propagation is usually not well known as only simplified models of geological structures are available. Therefore, the information about the source retrieved by inverting seismograms may include errors due to incomplete knowledge of the rock mass along the propagation path, which in turn cause a distortion in the calculated moment tensor (MT). The distortion of the MT on a local scale was observed by inverting records of a simulated rock burst conducted at the Kopanang gold mine in South Africa. A dominant isotropic component of the explosive characteristics was found from the inversion. The deviatoric components retrieved from the blast are spurious. A test of their stability indicated that they are not significant, assuming an uncertainty above 5% for velocities and 10% for attenuation within the homogeneous model available for the mine. Thus, the retrieval of the MT from records of local networks in mines using a homogeneous model of the rock mass seems to be feasible. However, the homogeneous model of the rock mass can only be applied to close stations, within a few kilometres of the source. The seismic records from distant stations were too complex to be modelled by a homogeneous rock mass. Records of six mine-induced seismic events recorded at the Kopanang gold mine were also inverted. A vertical linear dipole along the pressure (P) axis was found for three of the events, suggesting a pillar burst. The mechanism of two events contains an isotropic implosion together with a nearly vertical dip-slip, and seems to indicate a combination of a cavity collapse with a down dip-slip along a nearly vertical fault. One event corresponds to a dipole along the tensional (T) axis. However, it is vertical, thus its association with tensile faulting of the hanging wall is uncertain.